The MCrAlY coating has been potential candidate for the parts applied in friction and corrosion conditions, and CNTs (carbon nanotubes) are expected to improve the service performance of coatings owing to high lubrication and low chemical reactivity. In this work, a systematic investigation on the tribological and corrosion properties of CoCrAlYTaSiC-xCNTs coatings deposited by laser melting was analyzed. Results showed that the coatings had good-quality without typical metallurgical defects. The CNTs addition homogenized and refined the microstructure of coating, and also improved the tribological and corrosion properties. As the CNTs content changed from 0 to 4 wt%, the wear rate of coating decreased from 16.23 × 10-3 to 7.58 × 10-3 mg m−1, the jcorr of coating decreased from 4.13 × 10-4 to 1.23 × 10-4 A cm−2, and the Rct values increased from 12.69 to 25.07 Ω cm2.